Copper Tube Straight Cut off Machine Pipe Straightening and Cutting Machine Qp10mm

Basic Info

Model NO.	QP10mm
Type	CNC
Usage	Wire, Pipe
Voltage	380V
Automatic Grade	Automatic
Principle	Small Deformation
Certification	ISO9001
Warranty	12 Months
Customized	Customized
Condition	New
Transport Package	Wooden
Specification	2300mm× 600mm× 1280mm
HS Code	0701900000
Production Capacity	1000units/Mouth

Product Description

Copper Tube Straight Cut off Machine pipe Straightening and cutting machine QP10mm

 

Specifications
1. Model:2300mm*600mm*1280mm
2. Drilling crew plane height: About 850mm
3. Weight:500kg
4. Power Supply: Three-phase five-wire 380v bring zero line and ground wire
5. Power: 3kw
6. Air Pressure: 0.5-0.8mpa
7. rough shape cutting to adapt to the pipe:4-16 aluminium tube;4-16 copper pipe;4-16 band pipe
8. Feeding speed: 0-50M
9. cutting ways: Single - knife direct rotation without cuttings cutting. clipping time: 2-2.5S/time. Three meters per time about 6 seconds, An eight-hour day produces about 3,000 to 4,000 pieces.
10. Equipment use field: Automobile, air conditioning, refrigerator freezer, water dispenser, home appliance, etc.
11. control principle:PLC programmable logic controller,OP-320text operation,Synchronous belt feeding,servo motor drive,Japan omron rotary encoder counting,The pneumatic original adopts SNS.
12. This machine is aimed at the following (copper tube). The tube is straightened to the straightening mechanism of the main engine, and the servo motor drives the synchronous belt to drive the pipe to the cutting-free cutting machine.Finally, it is taken over by pneumatic aggregates, and the whole process is automatic and reliable. The machine break up and operate automatically, the mold change is simple, the operation is simple, the production efficiency is high.
13. Main structure and principle:Mechanical structure: it is composed of flat rack, straightening group, feeding tube section, cutting head section and feeding frame.
Gas path control: cylinder clamp, servo drive synchronous belt feeding tube, cylinder clamp, cutting tube, pull, cylinder connection.
Circuit control system: by PLC control servo motor forward tube, after the length of the encoder, after reaching the set length, the PLC control solenoid valve action, drive the cylinder to cut off the pipe.
Processing pipe: this equipment is a single pipe equipment, and the size of the open material pipe is applicable to the mechanical limit range. Different materials need to be replaced with straightening wheel,

Detailed Photos

Product Parameters

1 Model KA 2 Suit material Copper aluminum tube 3 Pipe diameter Φ4-Φ16.8 4 Least cutting length 60mm 5 Number of cutting at one time 1pc 6 output power 1.12KW 7 Feeding speed The fastest speed is 60m/min 8 operating system Touch screen operation, frequency conversion operation +PLC 9 Operation mode Automatic 10 surface condition here is no obvious pull, scratch, pressure scar and knurled scratch on the surface of the tube 11 input voltage 380V, three-phase, 50Hz 12 Work pressure 0.6~0.8Mpa

Certifications

Company Profile

Other products

Contact us